Custom Height V-Groove Panelling

V-Groove Wall Panelling

Transform your home with our custom height MDF V Groove panelling kit! This coastal-style panelling is perfect if you would like a clean and modern look for your home. We understand that every space is unique, so we will cut the V-Grooves vertically from a 9mm MDF sheet and then cut the board to size to fit your specific measurements seamlessly. You can opt for us to pre-prime the board/s for you too, so that once it’s been delivered it’s ready to stick on the wall and paint straight away!

There are plenty of possibilities to be creative with your tongue and groove panelling. You can also add a wainscotting cap to be placed above the panelling in the form of a dado rail for a textured decorative touch or a picture shelf which is cut to the width of your panelling and can be placed above the panelling to use to display your favourite home decor. We also offer four different choices of groove spacing. You can choose from 80mm, 120mm, 180mm or 220mm depending on how much space you would like between each groove.

Placing your grooved panel board at a custom height means that you can leave room for lighting and shelving on the top half of your walls. The beauty of custom height is that you can measure around your furniture and have the panelling cut to your dimensions, meaning this product is tailored specifically for your home.

Our wall panelling is popular in many rooms around the home. We often see it installed with a picture shelf behind beds, and in hallways with a Dado rail add-on so that you can leave your coat hooks placed above it. We have also seen a lot of nurseries being decorated with custom height panelling recently! You can personalise your MDF V Groove panelling to match whichever room it is installed in by painting it any colour of your choice.

We can also professionally prime your panels, which means once it arrives all you need to do is stick it to the wall and paint over it! Please note, that the grooves themselves may appear to be bare upon delivery. Although the grooves may be exposed, they are still perfectly suitable for painting. We have thoroughly tested this adjustment and found that it does not compromise the quality or integrity of the final product. If you do not order your panelling to come primed, then you will need to do this yourself when it arrives before you apply paint for a nice even finish.

We can only provide wood sheets with a maximum dimension of 2400mm x 1200mm. If your wall is longer than 1200mm, we will provide multiple pieces to make up the total length needed.

Grooved MDF Panel Installation

It couldn't be simpler to install your Custom Height V-Groove panelling. Everything is cut to size for you so all you have to do is apply adhesive and stick to the wall. Here are some simple steps for installation, however, your order will come with a more detailed physical instruction manual to help you out!

If you have a large space to panel, you may have received multiple panels to fit together. You can lay them out on the floor to familiarise yourself with how they will be arranged on the wall.

What You Will Need

• Adhesive
• Dust Sheets
• Spirit level
• Measuring tape
• Caulk
• Caulking gun
• Sandpaper
• Filling Knife
• Choice of paint colour
• Pencil
• Pre-Cut MDF V Groove Panel Boards