Walnut Veneer Slab Kitchen Doors

Measuring kitchen cabinet doors accurately is a crucial step to achieving a seamless and visually appealing kitchen design.

When measuring please ensure you have an accurate steel tape measure, do not use a fabric tape measure to measure your doors.

Take height measurements

1. Place the end of your measuring tape at the top edge of the door, against the cabinet frame.
2. Extend the tape measure vertically down to the bottom edge of the door, keeping it parallel to the side of the cabinet.
3. Read and record the measurement in millimetres (mm). Take the measurement in at least two different places on the door to account for any irregularities.

Measure the width

1. Place one end of the measuring tape against the left edge of the door, flush against the cabinet frame.
2. Extend the tape measure across the width of the door until you reach the right edge.
3. Read and record the measurement, again taking multiple measurements at different points along the width of the door to ensure accuracy.

Finally double check your measurements as all our kitchen doors are cut to your exact requirements, we can't be held responsible for mistakes you make in your measurements and we do not recut if you have provided us with the wrong measurements.

For more detailed instructions please see our guide on how to measure your kitchen doors.