Drilled holes are holes that go all the way through the wood to create a small hole that you can then use to screw the wood onto something else.
We can save you time and effort by drilling holes for you.
You can select corners, edges or a centre hole.
You can then choose the size of the hole and the distance from the edge for each individual hole. Need them all the same size and distance? No problem, click select all. Don't want one of the holes? Just click on the bin to delete it.
Click +Add Additional Holes to choose edges and corners or to add a centre hole as well.
You can check the hole placement in the visualiser.
Please make sure your selection aligns with the orientation of the product.
If you require more holes or bespoke hole placement, please use our Cutouts option below.
Top tip: Avoid over-tightening screws on wood; hand-tighten only to prevent potential splitting.
Cost: £4 per hole
"Distance from edge" is the distance from the edge to the middle of the hole. If it is a corner hole this is the distance from both edges to the middle of the hole.
We recommend a minimum distance of 20mm from the edge to prevent cracking.
Please note these are not pilot holes, they are holes that go all the way through the wood.
